tired-retired

LATEST ACTIVITY

• Posted in thread: carburetor problem with my JD 1020 on 05/15/2012 at 9:37AM
  I was making pretty good headway on the av, then all of a sudden my back went hay wire. Last 7weeks have
  not been pleasant by any means. I got her wired up and running and she sounds good and that's w...

• Posted in thread: carburetor problem with my JD 1020 on 05/15/2012 at 9:25AM
  A friend stopped in when I had the carb. Apart and shook the float and noticed that it had leaked a
  little gas into it. I had not noticed that, so I got a new float and that corrected my problem. Than...

• Posted in thread: carburetor problem with my JD 1020 on 02/15/2012 at 4:59PM
  Thanks for the info on the carb. I tried to call and got no answer. It was almost 6 oclock when I saw
  your message, so they may have been closed. I'll try again tomorrow. Where is Mcgrew Tractor locat...

• Posted in thread: carburetor problem with my JD 1020 on 02/11/2012 at 6:04AM
  I'm having a carburetor problem with my JD 1020. Couldn't get it running, found there was no fuel in the
  carb so I checked the needle valve and found that it was stuck and not allowing gas to come in....

• Posted in thread: Hello from Quakertown pa on 02/05/2012 at 6:24AM
  Welcome to the forum Pat:Appears that you will fit right in. I'm new also, but have been enjoying the
  chats for a few months now. I can tell your about as full of --it as some of the rest of us. My wi...

• Posted in thread: Corrosion and Fouling In Ultra Low Sulfur Diesel on 01/30/2012 at 4:32AM
  The only time I had a problem was due to my own oversight. While getting ready to work ground one day, I
  pumped my storage tank down, so I called the distributor to have fuel delivered asap. I was in ...

• Posted in thread: Vintage Iron Pictures on 01/26/2012 at 5:40AM
  Thanks for posting the interesting pictures Tim. I enjoy looking at that kind of history and became
  especially interested when I noticed it had been bought by Bob Dunn. My name is Jim Dunn, from Harri...

• Posted in thread: 1940 9n won't start please help!! on 01/16/2012 at 6:26AM
  All above suggestions are good. One other check would be to make sure there are good connections on all
  your battery cables. Tight connections are extremely important on a low voltage system. Look for...

• Posted in thread: New grand daughter! on 01/15/2012 at 5:59AM
  Congrats to you and your family. Nothing better that spoiling GK's. I have two girls and can't begin to
  spend enough time with them. They live 1-1/2 hours away. Hear funny stories every week.

• Posted in thread: Wood splitter??? on 01/14/2012 at 12:49PM
  Thought I would share with you some of my experience and it might help you make some future decisions.
  Been burning wood since the 1960's and still use it in my shop. Quit burning it in the house 7 ye...