pegasus

LATEST ACTIVITY

• Posted in thread: IH 2500B 2514B Manuals on 03/31/2012 at 4:54PM
  Got it today. Nice job.Thanks,Joe

• Posted in thread: IH 2500B 2514B Manuals on 03/22/2012 at 5:56AM
  I got it. Do you need the one for the diesel?I only have the service manual, operator manual and
  hydrostatic manual. I don't have ANY parts manuals.I could use parts manuals for the tractor, engine (d...

• Posted in thread: IH 2500B 2514B Manuals on 03/20/2012 at 5:42AM
  I have sent you a PM with my email address. I would like a copy of the parts manual.Joe

• Posted in thread: blower for a 8n on 12/24/2011 at 7:07AM
  I don't believe your 8N will work very well with a blower. You only have 1 reverse gear and when the rpm
  is at pto speed you will be going too fast for anything but the lightest of snows. Also as I re...

• Posted in thread: Show us your snow removal shots! on 12/01/2011 at 3:31PM
  It's not snowing yet, but, I am ready, bring it on.

• Posted in thread: International 2500B and 2050 loader on 10/01/2011 at 6:17AM
  You have several choices. Depends if the 2050 loader has a joy stick control. If it does you can hook the
  two hoses to one of your remotes, either at the rear or at the valve. You will have to latch t...

• Posted in thread: Snow Blowing VS Snow Moving With FEL on 09/16/2011 at 7:32PM
  The answer to your question is not easy. Depends on how much snow you get per year and per snowfall. Up
  to 3 or 4 inches a blade works good until your windrow gets too big and your driveway becomes na...

• Posted in thread: IH 464 Hydaulics Routing... HELP!!! on 08/26/2011 at 3:50PM
  "Power beyond" is your answer. Ask your dealer if it was/is available for your tractor. Their price will
  be high, but after market is available. That is what I did, see above post by me.

• Posted in thread: 574 tires on 08/25/2011 at 10:44AM
  You seem to find the good deals. Will your new (old) chains fit?

• Posted in thread: IH 464 Hydaulics Routing... HELP!!! on 08/25/2011 at 10:41AM
  I went through the same questions when I mounted a Woods LU126 loader on my 2500B (same as a 574). I had
  two remotes so we used one to supply the loader joystick. All was well until I needed to use th...