Last Activity:03-26-2014 6:02 PM
1 Likes on 1 Posts
Posted in thread: Hard start after warm on 05-31-2013 at 01:58 PM
Yes check your grounds. My sons cub cadet 111 had that problem I ran a ground to the starter,
cut out the middle man so to speak. It cranked twice as fast after that. O, yes it has an 18 hp
briggs in ...
Posted in thread: Garden Tractor Pulling Discussion on 02-22-2013 at 01:05 PM
I feel there is alot more to be concerned with than locking the diff. the ss12 above has had
weight placement changes 4 times the rims widened, and a 16hp tecumseh installed. My son places
Posted in thread: Garden Tractor Pulling Discussion on 02-21-2013 at 03:39 PM
An open differential allows you to steer by leaning when the front is up.
Posted in thread: fire breather st16 on 05-02-2012 at 10:46 AM
The origional engine is on the shelf. I'll rip it apart this year but before I do I'll try the
Posted in thread: belt sizes??? on 05-02-2012 at 10:39 AM
Thankyou Bill I'll start the searchNev
Posted in thread: belt sizes??? on 04-30-2012 at 07:08 PM
Hi everyone,My son and I are working on a suburban 725 and would like any info on the belt
sizes from engine to speed changer, speed changer to tranny. Also deck belts engine to mule and
mule to deck....
Posted in thread: Garden Tractor Pulling Discussion on 10-07-2011 at 02:57 PM
My son has been running a 1969 ss12 sears that used as much oil as gas and still placed often.
With proper weight placement you go far with any 70s or earlier tractor. cast iron engines are
Posted in thread: fire breather st16 on 07-05-2011 at 04:42 PM
We bought another good running engine took the muffler off and it did the same thing. I guess
they just run that way. I've never seen anything like it.