fleetguardstore

LATEST ACTIVITY

• Posted in thread: Oliver on 09/23/2009 at 11:56PM
  Had to laugh when i read this, as our 1850 Oliver is just about ready to leave the shop after the clutch
  exploded and the starter went. Beside that it has been a good ole tractor.

• Posted in thread: New Shipping on 09/23/2009 at 11:44PM
  Just letting everyone from IA, NE, SD, ND, MN, and IL know we are going to start using Spee Dee delivery
  service for these states, which will cut shipping cost by 50% or more on most orders. And we al...

• Posted in thread: Parts Cross Reference on 07/23/2009 at 1:36PM
  I am not finding any cross or information on this filter. Do you have the specs on it?

• Posted in thread: John Deere 4420 on 06/15/2009 at 7:11PM
  For Sale:1980 JD 4420 Diesel3901 hoursIn shed since bought newAlso 215 grain platformLocation: Story
  City, Iowa 502484420 Picture4420 Picture4420 Picture4420 Picture4420 Picture4420 PictureHead Pictur...

• Posted in thread: 7020 and 7045 on 05/31/2009 at 11:49PM
  Got the 7045's steering fix on Friday. The problem was the left hyd filter cover wasnt sealing and
  sucking air. Since i was in the filter housing i replaced the hyd filter with a fleetguard HF6018 whi...

• Posted in thread: NH3 Applicator on 05/31/2009 at 11:03PM
  we just use it for our own use. it does cover alot of land in a hurry. its the biggest 3-point NH3
  applicator i can find on the net. all others top out at 38' wide.

• Posted in thread: NH3 Applicator on 05/28/2009 at 11:51PM
  Here are some pics of a 3 point NH3 applicator we made for this springs field work. Its on a 8410 JD.
  Over all width is about 50'. Pic 1Pic 2There is still more work to be done(when i have time), but ...

• Posted in thread: 7020 and 7045 on 05/28/2009 at 11:10PM
  Pulled the old 7020 and 7045 up to the shop again today. Started with the 7045, they said the hyd were
  weak, steering works sometimes, and pto doesn't work under a load. So i bought 3 new gauges and h...

• Posted in thread: How does one start a diesel? on 05/17/2009 at 11:01PM
  We run 4 allis's 7020, 7045, 7060 and a 8050. They are all hard starters, during the winter we almost
  always have to use the either button, press it while cranking and only 1-3 times(but if it will st...

• Posted in thread: Farmall Super M-TA on 05/03/2009 at 3:46PM
  Recently i rebuilt the "box" on a farmall M-TA went through and replaced the ta and most the gears and
  shafts. Got it put all back together and started it. It had set all winter and when i started it ...