dawzie

LATEST ACTIVITY

• Posted in thread: 8N having problems on 01/06/2011 at 5:20PM
  Tom, I have a '50 also. When I pull my oil cap, it's a white milky looking gooo. Pull the dip stick and
  it looks fine. That is normal as long as you are not loosing coolent in your radiator.chris

• Posted in thread: Ford 800 5 speed on 08/20/2010 at 8:23PM
  Reliable, yes, PIA-YES. Only offered them for a couple of years. Then went to old style four speeds, then
  3 speed with hi/lo then 4 speed with hi/lo and the ever troublesome selet-o-matic

• Posted in thread: WANTED - info on TLB which one 2 buy on 05/28/2010 at 7:06PM
  My company needs to purchase a smaller TLB. We have a Case 580M now. Its just a tad to big to get in
  everyones back yard to dig open septic tanks and replace pipes that are not working. I also need lo...

• Posted in thread: Tryin to resurrect an 8n on 05/25/2010 at 7:25PM
  My father had bought a brand new '56 jubulie with a sherman hoe and loader. They are a very heavy hoe. A
  neighbor of ours still has it. I'll try and get some pics of it.

• Posted in thread: Tryin to resurrect an 8n on 05/24/2010 at 7:53PM
  Hello freebird, well I think I would start with a good flushing of the cooling system and run just water
  to you figure things out. Motor oil, filter, dont forget about the screen in the fuel tank on t...

• Posted in thread: Roll Call: Ford owners! on 03/25/2010 at 6:24PM
  here is my '50

• Posted in thread: 8N manifold on 03/09/2010 at 7:50PM
  I put my new gaskets on with nothing on them. Two years later, no problem. Good luck with your "8-N"A pic
  of mine

• Posted in thread: 8N manifold on 03/08/2010 at 7:59PM
  What about new exhust gasket??, torque is good, I used neversieze on my threads.

• Posted in thread: 52 Ford 8n on 02/24/2010 at 11:42PM
  Welcome aboard Andy; I have a '50 8-N also. Not sure of the temp swing in your part of Az. but cooling
  below freezing then temps getting warm will cause some condensation inside your tractor over time...

• Posted in thread: Rebuild on 12/01/2009 at 3:57PM
  Put the battery on a trickle charger until charged. Or replace the battery with new if it is old. See how
  it runs with a fully charged battery. Should be alot better.Here is a link to a site for the w...