david686

LATEST ACTIVITY

• Posted in thread: Ford 3000-Hydraulic Quick connects on 09/09/2009 at 2:36PM
  Am looking for information on putting hydraulic quick connects on my Ford 3000. It has an exteral pump so
  this might be possible?

• Posted in thread: ford 3000 info on 09/09/2009 at 2:25PM
  Don't waste time or money rebuilding a Ford 3000 gas, Holley Carb. I did and was sorry. I worked for 5
  years trying to get the tractor to run right, no luck. Just bite the bullet and buy the $268 Zeni...

• Posted in thread: 3000-gas-stalls hot on 03/08/2009 at 4:50PM
  I had the Holley, replaced it with the Zenith 13914. A perfect bolt on. I now don't need to run with 1/2
  choke.

• Posted in thread: 3000-gas-stalls hot on 03/08/2009 at 4:17PM
  I bought the replacement Zenith carb and it is running great, no more problems. Thanks

• Posted in thread: 3000-gas-stalls hot on 02/11/2009 at 8:35AM
  No, once it gets all warmed up, it will not run unless I pour a little fuel into each cylinder-then runs
  badly until 'that' gas is gone. I plan on opening up the carb again and check and set everythin...

• Posted in thread: 3000-gas-stalls hot on 02/10/2009 at 6:46PM
  Failed to say that it did this before carb overhaul, worked on all jets and passages, will check float
  level: have a book-just didn't want to open carb again; this one is hard, thanks

• Posted in thread: 3000-gas-stalls hot on 02/10/2009 at 11:44AM
  After years of running with ½ choke, Rebuild the carb – the pump in the carb was frozen, cleaned entire
  carbStarted and it ran great even under a load with out the choke at all, only until it got hotS...