VIEW MY

captchas

retired gear head

Join Date:

06-19-2010

Last Activity:

06-22-2010 2:35 PM

    ABOUT ME

  • cub cadet
  • 1
  • retired auto,small engine mechanic
  • deep sea sport fishing
  • charter boat captain

LATEST ACTIVITY

  • Posted in thread: help on 06/22/2010 at 2:31PM
    the serial number is in the 1953 range for a to30 model , the engine is a continental. here is some major
    help from a great bunch of people Antique Ferguson Tractor Restoration Club

  • Posted in thread: cub cadet 102 on 06/22/2010 at 2:15PM
    yes check the fuel cap and see if it vents. also check to see if the fuel shut off on the glass bowl is
    open all the way. and if the metal fuel lines are clear.getting more into the machine.make sure ...

  • Posted in thread: 1525 Slowing down on 06/22/2010 at 2:04PM
    that unit has a hydrogear 0510 unit . is the trans fuild full? have the correct oil in it? sounds like
    it's low or someone screwed with the pedal rod to make it run faster,which could cause a prematur...

  • Posted in thread: LT 1050, bad fit on hood on 06/22/2010 at 1:55PM
    check and see if there is a set of thick metal plates bolted on for a snow plow! is so someone may have
    removed the fast connect bracket, and used the longer non fast brackets from the oem kit. these ...

  • Posted in thread: Speeding up the LT 1050 on 06/22/2010 at 1:49PM
    that mod,should not be done! the upper hole in the arm is for another model machine.this mod could cause
    the lose of a hydrogear trans that costs almost $1.000.00 for the part alone.

  • Posted in thread: Some useful facts about diesel. on 06/22/2010 at 1:43PM
    smoke rude bicyclist! how about smoking rude jet skiers rideing to close to my transome. when i open up
    up a pair of well over fueled 1200 mhp, c18 cats. now thats smoke!

  • Posted in thread: hello on 06/22/2010 at 1:32PM
    the 1250 is a 1978,the 71 a 1965 the one with out the hood is a 1966 102.

  • Posted in thread: waste motor oil on 06/21/2010 at 5:51PM
    to much trouble to filter it. i use it in my chainsaws.my too as chain oil,you use more but since it's
    free in the end and works

  • Posted in thread: Opinion please: Do you use gas stabilizer? Yes or No? on 06/21/2010 at 5:45PM
    stabilizer is a most do at all times with the high grain content gas we most use now. the octane rateing
    starts to fall after about a month in storage with out it.my personal mix per 5 gallon can is a...

  • Posted in thread: hello on 06/21/2010 at 5:32PM
    here is a few shots,one is of my pride and joy a 1978 1250 that is till running like a clock

0 COMMENTS
POST A COMMENT
FOLLOW US ON
PHOTO OF THE DAY
after painting in my basement