bigcountry1009

LATEST ACTIVITY

• Posted in thread: P218 Onan help on 10/01/2011 at 8:15AM
  I wouldn't think the valves would have an effect either, but small engines aren't my strong point. I'm
  even thinking of putting a generic auto electric pump on it.

• Posted in thread: P218 Onan help on 09/29/2011 at 7:58PM
  Hi, I'm new here. Just happened to be searching for some info info on Onan engines and ran across this
  forum. Very interesting stuff on here. Now, I haven't a John Deer, but this Onan is actually on a...

• Posted in thread: fall garden on 09/24/2011 at 3:05PM
  Anyone gonna try a fall garden? I've got some tomatoes and cucumbers i hope beat the frost

• Posted in thread: Best price on Farm Pro/Jinma parts on 04/13/2008 at 5:38PM
  I've got to replace the head gasket on my 2420, and I need just about all the engine gaskets. Probly
  don't need everyone, but I'm gonna taked it just about completely apart anyway. Any advice on who h...

• Posted in thread: Farm Pro 2420 hydraulics on 04/12/2008 at 8:59PM
  Well, the stops were in place and adjusted in about 1 inch from the end of the rod. I noticed when I
  replaced the washers there really wasn't any wear on them. They looked like the new ones, just dirt...

• Posted in thread: Farm Pro 2420 hydraulics on 04/11/2008 at 3:31PM
  Thanks Chip, but I've already replaced those cylinder seals. It didn't help one bit. Still drops like a
  rock.

• Posted in thread: Farm Pro 2420 hydraulics on 04/09/2008 at 7:46PM
  Hey folks, been gone a while. I see my post is still here. I changed the cylinder washers on my Farm Pro,
  but it didn't help my problem. Now I'm down to possibly changing the whole lift cylinder and p...

• Posted in thread: Water in my Farm Pro's crank case on 04/09/2008 at 7:08PM
  My Farm Pro 2420 has suffered a small disaster. There is coolant in the oil. I'm assuming it is the head
  gasket. Gonna change it myself. Not too worried about it. My problem is I can't find any bolt t...

• Posted in thread: Farm Pro 2420 hydraulics on 04/22/2007 at 5:49AM
  Hey man, I'm satisfied with mine. I will mainly be mowing or tilling a garden with mine. And I can't
  afford the domestic brands at the moment. So, I've got to learn how to work on it to keep it tickin...

• Posted in thread: Farm Pro 2420 hydraulics on 04/21/2007 at 10:36AM
  Hey Chip, I think we've determined it is the o-ring and wipers. My dad had tightened the adjusting valve
  all the way down because our knob is broken off and he thought it was a fill plug of some sort,...