al b

LATEST ACTIVITY

• Posted in thread: Looking for oil specs for a governor on 04/26/2011 at 3:28PM
  I did not find out, I guess it is time to ask again.

• Posted in thread: How much is a 10A worth? on 12/28/2010 at 9:40AM
  I think $800 is a bit too much but pictures might change what I think.

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 09/05/2010 at 12:10PM
  I got the C clips and put them in and it goes up like normal.

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/25/2010 at 4:11AM
  I put it back together the way it was and it would not work then I put a 1/4" block behind the button and
  it works. But it is not right. I found parts from Sheaffers Town & Country Tractors, 815 284 3...

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/13/2010 at 11:26AM
  I took the plunger back off to take pictures.

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/13/2010 at 7:30AM
  I looked though the various JD parts and they are not the same as Yanmar. I do appreciate your
  assistance.

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/11/2010 at 7:42PM
  I believe there is something in there because I can feel it when I slide the o ring. I think you are
  right. Now I like to find out what the other part is then I should be all set.

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/11/2010 at 11:05AM
  I do not have #16 and I don't know what it is? I just got off the phone with Hoye and he said he doesn't
  have inside parts. Just a new valve, $250 I'm going to hold off on that for now and try to get ...

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/11/2010 at 9:15AM
  I can't tell by the drawing but it looks to me that there are two pieces missing according to the
  diagram. Inside my plunger, starting from the inside, I have a ball, spring, piston with a o ring on i...

• Posted in thread: Yanmar 1500d 3pt sticking in the up position on 08/09/2010 at 6:53PM
  I changed the fluid and cleaned the screen. Took the valve apart and polished the plunger and passed a
  light reamer on the case, cleaned eveything up and now it moves free inside the valve but it stil...