Ranch Hand

LATEST ACTIVITY

• Posted in thread: Farm Pro 2425 on 06/22/2011 at 5:28AM
  The 3 point lift capacity is 800 - 850 pounds. The 3 point backhoe should have a solid top link which
  means you don't / can't raise and lower the 3 point. A 6 foot hoe is the largest I would put on a ...

• Posted in thread: Farm Pro 2425 PTO Neutral on 05/09/2011 at 11:50AM
  Yes,Contact me through my web site or call me; Jinma Dealer, Wood Chipper , Compact Jinma TractorsA
  little complex.... best to chat on the phone.Ronald

• Posted in thread: Farm Pro 2425 PTO Neutral on 05/09/2011 at 4:39AM
  My next step would be to verify the PTO clutch adjustment.Ronald

• Posted in thread: where is the hydraulic filter? Farm Pro2425 on 02/05/2011 at 5:41AM
  #1; No spin-on so I guess it's under the seat. Is this strainer something that needs replaced
  occasionally? #2; I received no paperwork/manuals with this tractor. #1; I know this will sound like a
  sal...

• Posted in thread: where is the hydraulic filter? Farm Pro2425 on 02/04/2011 at 4:20AM
  If you have a Hyd filter it will be a spin on located at the starter.If you have a Strainer it is under
  the seat in top of the 3 point lift box.The Jinma 254LE is a lot like your tractor.Click here>> ...

• Posted in thread: oil leak on 02/02/2011 at 5:33AM
  I have a farmpro 2425 tractor it is pushing oil out of the top of the steering column, I personally have
  never had one in the shop doing that but, have had maybe 2-3 phone calls/emails in the past 6 ...

• Posted in thread: Relacement loader valves? on 02/02/2011 at 5:26AM
  I THINK the factory spec is around 850-900 pounds. I have never imported / sold the China loaders. Over
  time we have had several people bring there tractor/loader here for service and I have found the...

• Posted in thread: Relacement loader valves? on 01/31/2011 at 4:35PM
  1#; That's a good comparison with the water bucket. That's about how it feels when unloading a flatbed
  truck with as many as 100 active hives on it. Steady is the word.2#; Let me call a board meeting ...

• Posted in thread: Relacement loader valves? on 01/31/2011 at 5:25AM
  #1; ranchfarmhand, considering what I want to do with the loader, do you feel the new controls would make
  it perform as smoothly as I need to perform the aforementioned tasks?#2; I would not want to i...

• Posted in thread: Relacement loader valves? on 01/28/2011 at 5:40AM
  fivestring,Over time I have had several China MFD loader valves apart on the bench. The spool valves have
  been machined with loose tolerances. This equals very hard / impossible to feather the valve f...