PSJ

LATEST ACTIVITY

• Posted in thread: 601 rotor issues on 05/24/2012 at 6:24AM
  Is the spring clip in place? A wrap around spring clip slides over the distributor shaft to keep the
  rotor tight. If it's not there, you need to get one. It sets above the dust cap on the shaft. On mi...

• Posted in thread: Ford 641 Workmaster Questions and Advice on 05/24/2012 at 6:16AM
  [QUOTE=knifeman32;152910] My question was, is it okay to run an overrun clutch and a slip clutch at the
  same time? Also, will a standard 1 3/8 6 spline overrun clutch work alright?QUOTE]Answer, YES!

• Posted in thread: 55 Ford Steering box on 05/10/2012 at 6:22AM
  Well, I just found out that the New Holland site is not showing any parts for the 600 series. They say to
  go to the nearest dealer. PJ

• Posted in thread: 55 Ford Steering box on 05/10/2012 at 5:54AM
  Try going to the Ford New Holland Online Parts Store on the internet. Click on "Look up Parts by
  equipment" button. You'll need to enter your actual model number rather than the 600 series number. You...

• Posted in thread: 55 Ford Steering box on 05/09/2012 at 7:57AM
  I want to rebuild my steering box on the 55 600 Ford, but my shop manual only shows a break down and
  rebuild procedure of the optional power steering box. Doesn't make sense, but the standard box has ...

• Posted in thread: question poll on 05/05/2012 at 1:04PM
  They might be thinking of a smaller tractor. My A has the generator on the left side. Not converted, been
  there since new. PJ

• Posted in thread: 55 Ford 600---Power Steering ??? on 05/02/2012 at 9:36AM
  Did the 600 series come out with a power steering option? If it did, I'd like to see if a used one is
  available to convert mine over. The wife uses it to mow pasture and the steering is a little hard ...

• Posted in thread: Health Care Vote Today! Do the Democrats have enough votes? on 04/11/2012 at 8:01AM
  My daughter in law, who is English, her father who lived in England died recently because he couldn't get
  the proper care under the British health care system. He died due to delays by doctors and the...

• Posted in thread: Question about top speeds of tractors made in the 1980s on 02/24/2012 at 9:24AM
  You can also put in your novel that, anyone who will drive a farm tractor down the road at 40 MPH belongs
  in a mental institution! I'm talking everyday normal working farm tractors, not some hoped up ...

• Posted in thread: What HP is needed to pull 6 foot slasher through 2-3 ft high Paspalum grass? on 02/24/2012 at 9:12AM
  I've pulled a 6' bush hog for years with a 1955 Ford 600! You don't need 50 hp and up to pull a 6' mower!
  Unless you want to run it in 4th gear! You can only go so fast with your ground speed for the ...