Justin M

LATEST ACTIVITY

• Posted in thread: Start up problems! on 07/11/2010 at 5:02PM
  I'd go back to that Magneto. Sounds like you partially hit upon it.Ok, would you think the rebuild kit
  they have, would take care if the partial miss?

• Posted in thread: Start up problems! on 07/11/2010 at 1:42PM
  Well I took my magneto apart, and cleaned it also, and it started getting fire. It would pop and sputter,
  but wouldnt stay running. I adjusted the carb to what the rebuild kit specified, but not sure ...

• Posted in thread: Start up problems! on 07/10/2010 at 6:50PM
  How do the wires look? Are you getting fire to the cylinders?They are brand new, I built them. I need to
  do a continuity check on them to make sure they are built good.

• Posted in thread: Start up problems! on 07/10/2010 at 6:40PM
  Ok, the starter is very weak, so im going to pull it off and send it off to be rebuilt. Gotta guy locally
  that can do it. The carb is not leaking anymore from the intake, fixed that with the rebuild k...

• Posted in thread: Start up problems! on 07/09/2010 at 8:24PM
  The starter looks to be OE, and I just bought a carb repair kit. So im about to rebuild it and see what
  happens.

• Posted in thread: Start up problems! on 07/09/2010 at 6:39PM
  I just rebuilt the motor on my 1948 Farmall H. Today I finally got to hit the starter button, but no
  luck. It will turn over, but very slowly. Its a brand new battery (still 6 volt). It will turn over...

• Posted in thread: Cylinder wall crack?????? on 12/31/2009 at 7:05PM
  I bought a 1948 Farmall H. I am tearing the motor down and overhauling it. I have the sleeves out and
  noticed there are hairline cracks in the cylinder walls. What will happen if i just resleeve the c...

• Posted in thread: 1948 Farmall Engine on 12/31/2009 at 6:57PM
  I have a 1948 Farmall thats in the mode of restoration. I have the torn the block down all the way, and I
  have noticed there are a few hairline cracks in the cylinder walls. They dont look like they a...