Duey (IA)

LATEST ACTIVITY

• Posted in thread: wd 45 manifold on 04/05/2012 at 12:14PM
  The rectangle gaskets are for a D17 and are included in most gasket sets.The gaskets are made from
  asbestos with a tin cover.

• Posted in thread: Gleaner E combine on 03/29/2012 at 4:38PM
  If you ever have to replace a bearing on a shaft, or move a shaft to adjust a belt or chain, adjust the
  bearing on the other end of the shaft by loosening the flange bolts and rap the shaft to align t...

• Posted in thread: allis wd 45 on 12/30/2011 at 10:11PM
  Your oil pressure is great.....if it was much higher it will blow the filter.The bearings must be like
  new with pressure like that.The tractor serial number is above the brake adjustment screw, on the...

• Posted in thread: 1952 Allis WD 45 oil pressure on 12/28/2011 at 8:14PM
  Cam gets oil first, then mains, then rods, excess from pump goes through filter then back to pan. Gauge
  is between filter and engine so the filter determines gauge reading.Your readings sound about ri...

• Posted in thread: New here and have ?'s on 10/03/2010 at 10:24PM
  Standing behind the tractor, look to the left of the differental cover, just above the brake adjusting
  bolt. This is above the bar that connects the lift arms. If it is a WD45, that is where the seria...