Dareng

LATEST ACTIVITY

• Posted in thread: Harvester 434 Rear Leak on 01-15-2013 at 08:01 AM
  Cyrush,I own a 434 & it has just developed the same problem as Daren's tractor. Was thinking of
  replacing the seal if it's not too big a job. If possible could I get a copy of the manual
  too?RegardsDo...

• Posted in thread: Need Information on 11-19-2012 at 08:21 PM
  Hello to you all!I'm hoping someone is able to help me. We recently acquired a classic MF hay
  wagon. The bed needs to be redone, but looking forward to the project.I'm wondering if anyone
  is able to p...

• Posted in thread: Harvester 434 Rear Leak on 05-22-2012 at 03:22 PM
  I have tried searching but I can't seem to find one. Can you PM me your email address? I may
  have something that will help you.

• Posted in thread: Hydraulics International 434 on 05-02-2012 at 02:58 PM
  Not sure on the states side, but up where I am there are 2 major international dealers in my
  area...HUB International, and Chas. Richards & Sons. know if you want to import that far...but
  maybe worth...

• Posted in thread: Case 970 pto won't hold rpm on 05-02-2012 at 07:06 AM
  The other thing you can check (since it's cable), is make sure there is no excess slack in the
  cable. If the cable has streached, it may not be engaging the end units fully. The pump may be
  on its las...

• Posted in thread: Yet another hydraulic question...but this one's tricky on 05-01-2012 at 03:04 PM
  Hello to you all again,A few days ago I posted a question regarding a fluid leak I have coming
  from one of the hydraulic Cylinders, but I may have found a place that will be able to get me
  an original...

• Posted in thread: HELP!! Hydraulic Fluid Leak on 05-01-2012 at 08:36 AM
  Thank you!!

• Posted in thread: HELP!! Hydraulic Fluid Leak on 04-30-2012 at 06:50 AM
  Hello everone!!I have a 1971 IH434 Diesel, with the loader attachment. But...my front tilt
  cylinderhas now sprung a leak where the piston extends and contracts. So bad that as I'm
  driving I can see it...

• Posted in thread: Case 970 pto won't hold rpm on 04-28-2012 at 10:18 PM
  Yes, if the fluid is overfilled then there is less room for expansion when it gets hot under
  load. This could be the problem. I would try and drain all of the fluid out, and then find out
  exactly how ...

• Posted in thread: 1969 Case 580 isn't getting fuel on 04-28-2012 at 10:12 PM
  Dealing with the fuel...I ran into the issue when i ran my IH out of fuel while on my way back
  from bailing. Died right in front of the drive shed (both convenient and not). So i put in 10
  gal of fuel...