jonnywheels2

I have a International 2500B with frontend loader and backhoe. The transmission is a hydrostat and it will not move now. When I first bought it it would move in reverse after I changed fluid and all filters. Was told charge pump maybe bad, so I split the tractor and found that charge pump internal components had been remove. Bought Used/new charge pump and now it will not move at all. Any suggestions?

Also, I have been told that the International 574 tractor are basically the same tractor as the 2500. Question is if I found a 574 tractor with a manual transmission would the hydraulics operate the backhoe and loader properly?

jsbettis

I have an international 574 with a loader. It has a busted piston sleeve. Thinking about parting out. Everything else works good.

cyrush

574 GD tranny will fit, you will need to plumb steering return so it feeds any transmission options (T/a or Fwd/ Rev). then returns to MCV for IPTO and OIL cooler
OIl cooler on hydro is larger and fed from charge pump.

rango2

What are the chances you still have this loader tractor? May be interested if you do.