farmall240

Thanks to CountryBoy for the gauge order! Got all my new gauges in except the fuel gauge and also wired up the dash light switch. In any case, I had hoped to check out the sending unit to see if it was still working and came to find out that it had been removed and a plate put in its place. Didnt have much luck finding a replacement on the internet; anyone know one that would work in its place?

Thanks a bunch!
Christian

Country Boy

That may be an OEM part only. Some parts the aftermarket doesn't bother to build due to low demand. You could call your local CaseIH dealer and ask for part #371058R91. That's the fuel sending unit for that tractor.

__________________
'76 IH 1066 Turbo Diesel, '73 IH 766 Diesel, '72 IH 574 Utility Gas, '56 IH 350 Utility Gas, '46 Farmall H Gas, '08 Bobcat Toolcat 5600 Turbo

Nobody puts that "C" word in front of MY International!

farmall240

Thanks! Called Messicks and none of their distributors carries it (discontinued). So, I called my local NAPA store and they have a universal. He even gave me the ohm values for full/empty. The gauge I was looking at from bates doesnt have any tech data available from tech support. Know of any fuel gauges that would work?

Thanks again!