The electronic management unit (emu) needs to be recalibrated. The emu is the panel that the mfd, diff, and lights are on. Unscrew 4 screws lift emu out and disconnect wire harness. Let sit for an hour to completely discharge. Mark out a 330ft course. Reconnect emu turn headlight switch on press and hold mfd and diff lock switches while starting tractor (mfd and diff lock lights will blink). Drive to start of course press mfd switch drive in a straight line leave transmission in 7th gear. When you reach end of course press mfd button again. Turn key off and let sit for 20sec to store calibration.
Sent from my iPhone using Tractor Forum