Hello Forum,
Back in Dec.'04, I posted a thread about flipping out my front wheels on my Jinma224. After avaluating the feedback and weighing the pros and cons,, I have decided to not flip my front wheels out. I agree that it will put more stress on the intire front end assembly and therefore I will keep my front wheels turned in untill I hear from someone that has 1000 hours or more with the front wheels turned out on Jinma224.
For My upcoming projects on my little place, I plan on getting my very 1st 3ph auger to use with the Jinma224. I want to get a 12" auger bit and maybe a 9" auger bit also. Have any of you'all put an Auger on a 224 and do you think a 224 will handle a 12 inch auger bit?
Also I would like to know how your tractor is performing using the Auger and if you have any recommendations on a particular brand or features that you like or dislike on different brands.
I also am about to take the valve cover off and retorque the headbolts and then readjust the valve lash, and if you have any helpful information in doing this little bitty project, I would also be most appreciated.
Thanks Again &
Have a Nice day
Joe
PS: Anybody want to buy a motorsickle, I'm having more fun on the tractor.
:redbaron: