Cloneranger

Does anybody have a manual for a Case Ingersoll rototiller or can you tell me how to hook the hydraulics up to the tractor? I had a Case 446 tractor with a tiller and wanted to mount the tiller on my Case-Ingersoll 446 but the hydraulic lines and main valve assembly aren't the same. I have hydraulic lines and control valve for the tiller from a Case-Ingersoll 446 that I bought on ebay, but I'm not sure how to hook it up.

Cloneranger

I found a tiller manual and found out that's not what I needed. What I need is directions on how to hook up the PTO. Where do the hydraulic lines hook to the travel control valve?

tractor beam

No idea but welcome to the forum CR!

__________________
Oh Beautiful for smoggy skies, insecticided grain,
For strip-mined mountain's majesty above the asphalt plain.
America, America, man sheds his waste on thee,
And hides the pines with billboard signs, from sea to oily sea. _______________________________________________ Some say I have a bad attitude...... "Screw them!"

Ric

I do believe you need a rear Hydraulic PTO.Thats how they work on 2 of my tractors

jhngardner367

I just installed a tiller on a 446,and Ric is right the tillers are run from hydro.I have a frind that got their manual from a case dealer.If youy can't find one on line,Ican borrow his,and try to make a copy of the important sections,for you!Try to get some pics posted of the rear of the tractor,too,so I can see if you need any other parts for it.