slipshod

There are roll products that can be put inside pole structures that create finished walls and insulate all in one move.You fasten rods with an adhesive mount to the inside of your outside walls and the stuff is hung on them .I have seen it done this way for metal and wood buildings.

__________________
C.E.O.
Fly By Night Construction
Division of Slipshod Enterprizes

Ingersoll444

I think I have seen that stuff before years ago. Looks kinda like painted canvas?

__________________
Ingersoll224
Ingersoll444
Ford 8N
2 old Gravely L's

tisenberg

Ran across this and thought you might be interested. It's someones pole barn project. Intereting reading.

http://johnnypopper.com/barn/barn.htm

Argee

Here's a nice open air one!

Attached Images

 

__________________
Randy G

Ingersoll444

I still have not decided what route I want to take with this shop. Any new ideas out there? Probably in spring I will pay a visit to the building inspector and see if there are any regs I have to worry about. That could be my deciding factor right there. Can't realy sneak any thing by the building inspector, they are only a mile down the road.


Sence this will be a peice by peice project, I am leaning towards pole. This way I can build the shell, then finish the floor, and inside when I have time and money.

__________________
Ingersoll224
Ingersoll444
Ford 8N
2 old Gravely L's

MowHoward2210

Have you looked into a round or rounded steel building? I think one of those would help eliminate snow load and exterior maintenance concerns. Cost and construction ease seem to be in line with everything else.

I just started looking at these, and have not talked to anybody that has one. Not sure about insulating and interior wall construction, although I'm sure it can be done.

Here is one company I have been looking at: Pioneer

jodyand

Hey MowHoward Andy has one of those he was trying to sell last year he will sell it to you cheap. Here is the link to the thread.
Jody

Andys thread

And heres a link to the place he bought it from.

US buildings

__________________
Jody:usaflag:


Dodge
you drive the Rest I drive the Best.:driving: :tractorsm
1525 Cub Cadet
Snapper Comet

MowHoward2210

Jody, I am looking for something a little bigger, but thanks for your input and the link to US Buildings.

Live Oak

How much do are asking for it Andy and how much trailer would it take to haul it?

olds

Update:

Will sell the building for $1500 if interested. I need to move it out. It is over 1/2 of what I paid for it. Have all plans, manuals, parts, etc for this 20x30 building. Anyone interested please let me know soon! I am going to build a pole barn (24x36) in lieu of this building.

Thanks

Ingersoll444

boy wish you were closer sould likr a REAL good deal.

__________________
Ingersoll224
Ingersoll444
Ford 8N
2 old Gravely L's

chrpmaster

Update:

Will sell the building for $1500 if interested. I need to move it out. It is over 1/2 of what I paid for it. Have all plans, manuals, parts, etc for this 20x30 building. Anyone interested please let me know soon! I am going to build a pole barn (24x36) in lieu of this building.

Thanks

Admin

would be interested in buying you building. Could you send more pictures and details on construction?

Thanks

jodyand

Welcome chrpmaster as for as i know Andy still has it and im sure he will be on here shortly.
Jody

__________________
Jody:usaflag:


Dodge
you drive the Rest I drive the Best.:driving: :tractorsm
1525 Cub Cadet
Snapper Comet

olds

It is a 20x30 A-Frame arch building.
You can check out pictures and info on
the building here at the company website at www.us-buildings.com
Here is another link for the site:
http://www.us-buildings.com/shops_garages.html

It is a really nice building but I just don't know if I will ever get it built and I would like to see someone here at TF put it to good use. :-D

The construction involves either using
channel iron laid in custom slab (complete with construction plans, layouts etc) or building custom trench/piering solution and lying the prebuilt arches into the grooves and assembling. It seems to go very easily and smoothly once the process is up and moving along.

If you have any more questions, feel free to contact me via PM or email at
webmaster@tractorforum.com

Thanks!
Andy

siteturbo

If you want to talk about pole barns, I found this bulletin board forum at BarnsBB.com | Barns Bulletin Board and Forum that may be useful. :-)